Chart Patterns VI: Rectangles

The rectangle formation is often a very simple one to recognize. It is essentially a market that is trading in a range between two horizontal lines. The rectangle formation represents consolidation of the move that preceded it, creating a foundation for a continuation of a further move in the same direction.

The chart below showed the consolidation period of EUR/USD from May 2004 to October 2004. EUR/USD had been going on an up-trend since the beginning of 2002. In February 2004, EUR/USD started a retracement and followed by the consolidation period in the chart, forming a rectangle. EUR/USD traded between 1.1970 and 1.2460 for five months. The price eventually broke above 1.2460 in mid-October and continued the up-trend, reaching EUR/USD historical high at 1.3660 at the end of year 2004. The rectangular consolidation period created a foundation for the continuation of a further move in the up-trend.

The rectangle formation can be used in either an up trend or a down trend, and although it normally signals continuation of a market move in the direction of the original trend, the important signal is upon the breakout from the rectangle. Reversals are possible in a rectangle pattern if the breakout occurs back towards the origin of the trend that preceded the pattern.

Some Final Words about Technical Analysis

We have gone through some of the most common indicators in the previous articles. Traders may actually find that there are many other technical indicators in their charting software. There is no single indicator can do all the work, traders may pick a few of their favorites under different market situation.

When the Market is Ranging

When the market is ranging, there are only two possibilities if the price hits the boundary: retrace or breakthrough the boundary. The two possibilities make up the two major trading strategies in range-bound market: to trade inside the range or to trade after the breakthrough.

Technical indicators in Range-bound market

1. Oscillators (RSI, MACD, Stochastic)

The oscillators are the best detectors of overbought and oversold conditions. When the market is ranging, traders can pay attention to the overbought/oversold levels of the oscillators, or the crossovers of the MACD lines and Stochastic lines. The signals from the oscillators are always few bars behind the prices. Traders should compare the current price with support/resistance levels and the indicators' signals, so as to make a better trading decision.

2. Bollinger bands

In range-bound market, Bollinger bands help to tell the future direction of the price movement, particularly when the price breaks through the bands or rebounces away from the bands. If the bands are getting wider towards one direction (either up or down) in a range-bound market, it means the price is moving more vigorously towards that direction, and it is getting higher volatility. Price may eventually break through that boundary. If the bands and the central line is moving parallel and keep a constant width, the price is more likely to retrace at the two bands.

3. Support/resistant levels

Resistant levels are formed by recent highs, and support levels are formed by recent lows. The more times the price hits the recent highs/lows, the stronger is the resistance/support levels. Traders can buy at support levels and sell at resistant levels, and should always set tight stop just below the support level or above the resistant level to prevent any severe loss with subsequent breakthroughs.

4. Candlestick patterns

There are three indications from the candlestick patterns: bearish, bullish or neutral. Traders should not place their trades solely base on candlestick patterns. A bearish pattern (like a bearish engulfing pattern) is only valid when it occurs near the resistance levels. If the price rises further after a Doji, and it breaks through a resistant level, the Doji is seen as a bullish signal.

When the Market is Trending

Trends occur when the market makes higher highs or higher lows (or lowers lows and lower highs). When the price is near the support/resistance levels in a trending market, there are only two possibilities for the price movement: to retrace or to keep going in the original trending direction.

Technical indicators in Trending market

1. Trend-lines

The trend-lines indicate the direction of the trend and the support/resistant levels. Traders can buy at support level when the market is undergoing retracement, or can sell when the price falls below support level. On the other side, traders can sell at resistance level when the market re-bounces, or can buy when the price rises above the resistant level.

2. Fibonacci retracements

If the market is undergoing retracements, Fibonacci levels can estimate to which level the market is expected to resume its current trending direction. Traders can place orders near those Fibonacci levels.

3. Moving averages

Moving averages can tell the direction of the current trend and they can also act as support/resistant levels. If the price falls below a moving average support level, or it breaks above a moving average resistant level, it is a signal of reversal. The longer the period of the moving average, the more reliable is the signal.

4. Divergence of oscillators

Although the overbought/oversold levels of oscillators are of less use in trending market, the divergence of oscillators can indicate the future direction of the trend. When a divergence occurs, traders should pay attention to the trend-lines, moving averages and Fibonacci levels, to see if the retracements have caused any breakthroughs and confirms any reversal signals.

To conclude, traders shall not rely on only one technical analysis tool to make trading decisions. They shall consider the overall situation on the market and take references from different technical analysis tools. Even so, it does not mean that the more technical analysis tools they use, the more accurate are the decisions. In general, three to four references from different technical analysis tool groups would be enough.

Technical Indicators VIII: Stochastics

Stochastic is an oscillator that determines where the most recent closing price is relative to its price range over a given time period. It is one of the most popular oscillators that traders use in range-bound market.

The indicator involves two lines:

1. %K

2. %D which is a D-period moving average of %K

Where

1. %K = 100 [ (C - Ln) / (Hn - Ln) ]

2. C = latest close, Ln = lowest close over last n periods, Hn = highest high over last n periods

The most commonly used time period is 14, and the most common value for K and D are 5 and 3 respectively.

As you can see in the formula, %K measures where the closing price is in relation to the price range over n period of time. If the lowest close over last periods is 0, highest high over last n periods is 100, and the closing price is 75, then %K = 75%, which means the price is close quite close to the highest high.

Applications of Stochastics:

1. Detect overbought/oversold levels

When Stochastic is over 80, the pair is considered to be overbought. If Stochastic is below 20, the pair is considered to be oversold. It works best in range-bound market. If the currency pair is in strong trend, the overbought/oversold levels offer limited value.

2. Crossovers

If the %K line crosses above the %D line, especially below the lower extreme of 20, a buy signal is generated. If the %K line crosses below the %D line, especially above the higher extreme of 80, a sell signal is generated.

In the above charts, six selling signals were generated in the range-bound period of EUR/USD. Notice that Stochastic may stay above 80 when the up-trend went strong at later stage.

Technical Indicators VII: Momentum

Momentum measures the rate of change of the currency pair.

Momentum = V - Vn

Where
V = latest closing price
Vn = closing price n periods ago

If there is no change of closing price, momentum equals to 0, which is the central line of the indicator. When there is a rise of price, momentum is greater than 0. If the closing price is smaller than the closing price n periods ago, momentum is a negative value. The most common period for n is 14, traders can adjust the value according to their preference.

Applications of momentum

1. Detect overbought/oversold conditions

When momentum reaches upper boundary level, the pair is considered to be overbought. If momentum reaches lower boundary level, the pair is consider to be in oversold condition. Since momentum has no fix range, there is no standard value for the upper and lower boundary. Traders may consider different boundary values for different currencies after a while of observation.

2. Spot divergence

If momentum is at near its boundary and it heads different direction with the price, a divergence is occurred. Divergence may signal a weakening of the current trend or a reversal may happen.

3. Crossing the central line

The cross over of the central line is deemed as a change of direction of the general trend. When momentum crosses below the central line, a sell signal is issued, whereas a cross above the central line, a buy signal is generated.

Technical Indicators VI: Relative Strength Index (RSI)

Relative Strength Index (RSI) measures the strength of all upward movement against the strength of all downward movement in a specified time frame.

For mathematical formula of RSI is as follow:

• RSI = 100 - [100/(1+RS)]

• RS = average of n day's up closes / average of n day's down closes

The most common parameter for RSI is period 14, although users can pick their favorite period of time if they wish. It is one of the most popular oscillators that works well in range-bound market.

RSI can range from 0-100. In the formula, if RS = 1, which means the average n day's up closes equals to the average of n day's down closes, RSI = 50. In that case, the market is having an equal strength of upward and downward force. If RSI > 50, which means the upward force is stronger than the downward force. If RSI < 50, which means the downward force is stronger than the upward force.

Applications of RSI:

1. Detect overbought and oversold condition

If RSI > 70, the market is considered to be overbought, a selling signal is issued; if RSI < 30, the market is considered to be oversold, a buying signal is issued.

2. Spot Divergence

If the price near support/resistance level and the RSI begin to diverge and are heading different direction, it may signal a weakening of trend.

The occurrence of divergence can deemed to be the weakening of the current trend or a reversal is about to happen.

In the chart below, the price is making lower lows, however, the RSI does not make any lower lows, it lows are going higher and higher. That marks the weakening of the current downtrend.

Technical Indicators V: Moving Average Convergence Divergence (MACD)

Moving Average Convergence Divergence (MACD) shows the difference of two moving averages - EMA12 and EMA26, and a 9-day EMA of the difference is plotted against it to trigger buy or sell signal.

There are three parameters in MACD:

1. MACD line - the difference between the 12 and 26 period EMA

2. Signal line - the 9 day EMA of the MACD line

3. Histogram - a visual representation of the difference between the MACD line and the signal line

MACD is best use in range-bound market to detect the momentum change and overbought/oversold conditions within a price range.

Applications of MACD:

1. Detect overbought/oversold levels

When the MACD line is far above from the centerline, the market is considered to be in overbought condition; while the MACD line is far below the centerline, the market is deemed to be in oversold condition.

2. Crossovers

When the MACD line crosses above the signal line, a buying signal is generated; while the MACD line crosses below the signal line, a selling signal is generated.

3. Divergences

If the price is moving higher, but the MACD line is moving lower, it signals the weakening of the up-trend or a reversal. If the price is moving lower, but the MACD line is moving higher, it signals the weakening of the downtrend or a reversal.

Technical Indicators IV: Moving Average Envelopes

The moving average envelope is a variant application to the moving average. It is a trading band composed of two moving averages, which attempts to determine the range of market should be trading in. Traders can choose their period of MA, then form the upper line of the envelope by shifting the MA upwards and the lower line of the envelope by shifting the MA downwards.

The reasoning behind the envelope is that moving averages define the general trend of the market and are the best-fit line to the recent movement of the price. Most of the data should appear close to the moving average lines. The envelopes define a range away from the moving average that the price should return to the center in a short term if the price strays too far away from the moving average. Therefore, the envelopes are best to identify potential reversals when the price hits the envelope boundaries.

On a daily chart, it is common to use 21-day Simple Moving Average and form the envelopes with 2% or 3% above and below the 21 day SMA. For longer term trading, traders can choose longer time frame like 50-day SMA and larger percentage variation like 5%.

In the above chart, you can see prices stay within the 3% band most of the time. When the price hits the boundary of the envelopes, it is a sign of reversal. Somehow the price returned to the centerline and move on again. However, traders are reminded that not every signal is valid. When the trend is strong enough, it can raise (or fall) along the envelope boundary resulting many false signals.

Technical Indicators III: Bollinger Bands

Bollinger bands were created by John Bollinger in the early 1980s. The bands have similar theory and application with the Moving Average Envelopes. It has a set of three curves, the typical parameters are:

• Middle Bollinger Band = 20-period simple moving average

• Upper Bollinger Band = Middle Bollinger Band + 2 * 20-period standard deviation

• Lower Bollinger Band = Middle Bollinger Band - 2 * 20-period standard deviation

The theory behind Bollinger Bands is that, in a normal distribution data set, 68% of data should fall within one standard deviation and that roughly 95% should fall within two standard deviations. So 95% of the price should fall within the 2-width standard deviation, which is within the upper and lower band.

Bollinger bands are often used to forecast reversals in rangebound markets. When the price is close to the upper band, the market is more likely to be in overbought condition, and is likely to reverse. The same holds for the lower band condition.

In the chart below, you can see that prices are likely to reverse at the upper and lower bands. Since 95% of the prices should fall within the band, the price should move back within the envelope if it rises above the top band or falls below the bottom one.

Because standard deviation is also a measure of volatility, traders can know the market condition by observing the Bollinger bandwidth. The bands widen, meaning moves further away from the middle band, when the market is more volatile. The bands contact, meaning moves closer to the middle band, when the market is less volatile.

The Bollinger bands are best to use in ranging markets, but are of limited value in trending markets. As shown on the above chart, when the market is in strong trend, the price can move along the upper or lower band, resulting in many false signals. Traders are better to combine Bollinger bands with other indicators or candlestick patterns to determine a trade.

Technical Indicators II: Moving Averages

What is moving average?

Moving average is the average rate of a currency pair over a set period. For example, if you conduct a 20-day moving average (20 day MA), you simply add the close price of the past 20 days and divide it by 20. This is called a simple moving average (SMA).

The most common parameters for moving averages are 5, 10, 20, 50 and 100. The smaller the time frame, the more reactive and sensitive is the indicator to the market movement. The longer the time frame, the smoother is the moving average. Traders should keep in mind that the longer the time frame, the more reliable is the study.

Moving averages show the direction of the trend. As shown in the above chart, the shorter the time frame, the more sensitive is the SMA to the direction of the trend. In an up-trend, the shorter time frame averages should be above the longer ones, where the current price should be above the shortest SMA.

SMA, EMA and WMA

There are few varieties of the moving averages. The most common ones are: Simple Moving Average (SMA), Exponential Moving Average (EMA) and Linearly Weighted Moving Average (WMA). EMA and WMA are under the moving average family that they put more weight on recent data in calculations. They react faster than SMA to the current price movement. As shown on the chart below, 10 WMA is more sensitive to the current price movement than the 10 SMA.

Applications of Moving Average

1. Direction of the trend

Moving averages can show the direction of the current trend. Generally, an up-trend is confirmed when a short-term moving average crosses above a long-term one, and the short-term moving average remains above the long-term moving average. Conversely, a downtrend is confirmed when a short-term moving average crosses below a long-term one, and it remains below the long-term moving average.

Traders can recognize the direction of the trend with reference to the direction of the trend line and their order of arrangement.

2. Support and resistance

The moving averages can act as support and resistance lines. In an up-trend, the SMAs below the rising price can act as support levels. If there is a retracement, the price is likely to bounce off the moving averages. It is the same for a downtrend movement, that the SMAs above the falling price can act as resistance levels.

As shown in the chart below, EUR/USD has experienced a strong downtrend since April 2005. The price retraced a couple of times to the 10 day SMA, however failed to break through and followed with subsequent drops.

The longer the time frames of moving averages are regard as stronger support or resistance than shorter time frames ones. When the price hits the longer time frame moving average, it means a stronger retracement. Traders can combine the candlestick patterns when decide to trade with the moving averages. For instance, a selling decision in a downtrend can be confirmed by price retracement to a 20 day SMA level and a bearish engulfing pattern.

3. Crossovers Signals

Whenever a shorter-term moving average crosses over a longer-term one, it indicates that there is a momentum shift. Traders can use this opportunity to enter a trade in the direction of the crossover.

Since the shorter-term moving averages react more quickly to the market price, a crossover indicates a change of sentiment in the market. In the chart below, the 10-day SMA cut above the 20-day SMA in April 2006, it was a bullish crossover. It indicated an upward momentum. Later in June 2006, the 10-day SMA cut below the 20-day SMA, it indicated the up-trend had lost its momentum and the downtrend was in control. Traders can use the crossovers as entry and exit signals of trades.

The shorter term moving averages generate more crossovers as they react more quickly to the market. However, they also generate more false signals. Traders are recommend to trade the moving averages along with other technical analysis tools, like candlestick patterns or other technical indicators.

Limitations of Moving Averages

Moving averages are best to apply in a strong trending market, otherwise, there can be too frequent crossovers that includes many false signals.

In the chart below, USD/CHF was going an up-trend and there were many retracements to the support line. There were numerous crossovers between the 10-day SMA and 20-day SMA. In this case, the crossovers were inexact signals and they do not take into account the price in relation to the support level. Trading based on SMA crossovers requires caution and better to wait for other signals or candlestick patterns to confirm the trade once a crossover signal occurs.

Technical Indicators I: Introduction

Technical indicators are statistics of past market data base on different mathematical calculations. Traders use technical indicators extensively in technical analysis to predict the continuance and the reversals in currency trends.

There are two major types of technical indicators: trend following indicators and oscillators.

Trend following indicators reflect the direction and the strength of the current trend. Traders may enter a position when the trend following indicators showing the current trend is in a strong momentum. The most common trend following indicators are: moving averages and bollinger bands.

Oscillators are indicators banded between two extreme values that reflect short-term overbought or oversold conditions. In general, as the value of the oscillator approaches the upper extreme, the currency is said to be in an overbought condition, and as it approaches the lower extreme, the currency is consider to be oversold. Traders may exit a long-trade when the oscillators showing the current price is in an overbought condition, or they can exit a short-trade when the oscillators approach the lower extreme. The most common oscillators are: Relative Strength Index (RSI), Moving Average Concergence Difference (MACD) and Stochastic.

Nowadays, most charting packages include the above common technical indicators. Traders can find a charting package and add their favorite indicators to their charts. Traders tend to use a mix of trend following indicators and oscillators. They usually pick one from each category as the main reference. Most of the forex charting packages offer real-time streaming pricing. At the same time, all the calculations of the indicators are done automatically and instantaneously.

The following articles will introduce the common indicators mentioned above. Readers can choose their preferred indicators after knowing each of their mechanisms.

Fibonacci II: Sample Fibonacci Trades

The charts below show sample trades using the Fibonacci retracement. GBP/USD was going on an up-trend from November 2003. During an up-trend, traders would look for pullback and buy in. In January 2004, GBP/USD reached its first top at 1.8580 and started pullback. The pullback was until 1.7820 which was the 38.2% retracement of the up-trend. A bullish engulfing pattern at the 38.2% retracement level confirmed the pullback. The trend resumed its upward momentum and reached 1.9140 in Feburary.

After reaching the historical high at 1.9140, GBP/USD reversed its direction and started a downtrend in February 2004. It reached 1.7905 as an intermediate bottom. The price then rebounced. Traders would look for sell at rebounce. The price rebounced twice up to 50% retracement of the downtrend and they were confirmed by bearish engulfing pattern of the candlesticks.

Note that Fibonacci retracements can be use in both bullish (up-trend) and bearish (down-trend) markets. Traders should look for retracement levels and use them with candlestick patterns to confirm the trades.

Fibonacci I: Retracements

The price movement of any financial market is in wave format. Suppose a currency pair is on an up-trend, going from 1.0000 to 1.1000. After reaches certain top "boundary", 1.1000 for instance, it will retrace - meaning pull back down - before resuming its initial up-trend. Fibonacci Retracements are levels at which the market is expected to retrace to after a strong trend.

Based on mathematical numbers that repeat themselves in all walks of life, Fibonacci retracements attempt to measure the likely points that a currency pair will retrace, or pull back to within a range. The key numbers in forex trading are 38.2%, 50%, and 61.8%. We can use the Fibonacci retracement numbers to gauge how far retracement will occur after the top "boundary" is reached.

Mathematically, it works like this:

• The 38.2% line. Calculate 38.2% of the size of the range. The size of the range is the boundary (1.1000) minus the lower boundary (1.0000). In this case, the size of the range is 1,000 pips. 0.382 * 1,000 = 382. It is expected that the asset will retrace 382 points from its current trend. Assuming the asset is going up from 1.0000 to 1.1000, it would retrace 382 pips from 1.1000. 1.1000 - 382 pips = 1.0618. Accordingly, this is a key level to look out for; you may want to buy here, as it is expected the upward trend will resume after reaching this retracement level.

• The 50.0% line. Same deal; 50% of the range (1.1000) is 500. Take that off from top (1.1000) since it is an upward trend. 1.1000 - 500 pips = 1.0500. Look to resume the upward trend here.

• The 61.8% line. 61.8% of the range is 618. 1.1000 - 618 pips = 1.0382. If the asset retraces to here, it is viewed as an opportunity to buy.

If the asset were on a down trend - meaning it had gone from 1.1000 to 1.0000 - then you would use the Fibonacci numbers to calculate the retracement regarding how far it went up before resuming the downtrend again. In this case, 31.8% would be 1.0000 (the end point of the current trend) + 318 pips (size of range - 1,000 - * 0.318).

Steps to draw Fibonacci Retracements

1. Find an ongoing trend. Identify the top and the bottom of the trend. This can be a highly subjective matter. Traders can find the tops and the bottoms by looking at the charts and use their own judgment.

2. Use a charting software which has Fibonacci function, connect the bottom to the top

3. The default Fibonacci levels are 38.2%, 50% and 62.8%. The charting software usually allows users to change the default levels to draw their customized levels

Chart Patterns V: Triple Tops and Bottoms

A triple top is the same charting pattern as the double top with an extra relative high that touches the same resistance level. A triple top creates a strong resistance level and a neckline connecting the two relative lows in the middle of the pattern. A trader should enter a short position when the daily candle closes below the neckline of the triple top.

The entry point should be set a few points beneath the low of the candle that first closed below the neckline.

The triple bottom is similarly an extension of the double bottom. It simply contains an additional relative low on the chart that touches the same price as the two that preceded it. The triple bottom is a solid support level and can be a basis for entering a long position if it holds for a third time – particularly if there are additional indicators confirming a reversal at the triple bottom. Alternatively, a more conservative trader could also wait until the price closes above the neckline and buy when the following candle surpasses the high for the first candle. This is essentially the same logic utilized in trading the triple top, whereby traders place short orders to sell an asset at a few points beneath the low of the first candle that closes beneath neckline.

Chart Patterns IV: Double Tops and Bottoms

The double top formation is a straightforward pattern that is easy to recognize on a chart. One of the features of a market in an uptrend is a series of increasing highs and relatively higher lows. If the market on one of its high points fails to break above the previous high, but instead stalls at the same price, this is an indication that the trend is weakening and may reverse. A double top is therefore a simple horizontal line that connects two relative highs at the same price.

The relative low between the two highpoints of the double top creates a miniature version of the neckline in the head and shoulders pattern, and provides traders with a potential entry point to sell. Traders should sell once they receive reasonable confirmation that the neckline has been broken; a good indication of this is when a candle closes beneath the neckline. In the case of the double top, traders can then place an entry order a few points beneath the low of the first candle that closes beneath the neckline.

The double bottom pattern is the inversion of the double top. In a down-trend, the price tested twice the low level but failed to break through, forming a double bottom pattern. Traders can look for opportunities to buy above the neckline once the pattern is confirmed.

Chart Patterns III: Head and Shoulders

Head and Shoulders Pattern

 The Head and Shoulders pattern is one of the most famous reversal patterns and one that gives a clear signal and entry point. The head and shoulders in an uptrend consists of three relative highs: the first and last peaks are of nearly equal size and are the shoulders of the formation. The middle peak is greater than the other two and forms the head of the pattern. The relative lows in between the head and shoulders form a neckline at the base of the pattern. Once the pattern is completed, the neckline becomes a key support level; the market can bounce off it and reverse, or it can break through it and gather momentum.

Reverse Head and Shoulders

The reverse head and shoulders is the same formation in a downtrending market. The head and shoulders point lower in this case and signal a reversal of the market higher once the price crosses the neckline and closes on a daily chart.

Chart Patterns II: Rules for identifying Reversal Patterns

The following are the three basic tenets about identifying reversal patterns. While they may seem obvious and even simplistic, they are important for successfully using these patterns.

A Trend Must Exist - A trend must exist before a reversal of the trend. There can be no reversal if a trend does not exist in the first place. A reversal pattern that follows a large trend will have much more movement to retrace, and so the strength of the move after the reversal pattern will likely be stronger.

Trend Lines - The first precise signal that the trend is ending is often the failure of a trend line, that might also come along with oscillators that show overbought or oversold before a reversal pattern occurs. Note that the intraday break of the trend line is not significant until a daily candle closes through the line. The chart below shows a trend line that is broken on an intraday basis before the price recovers. The first strong signal that a reversal may be coming appears when the price closes below the green support line. The price subsequently rallies to form a double top, but it does not hold these gains.

 

 

Time Frame - Like relative highs/lows and trend lines, reversal patterns gain greater significance if they occur over a longer time frame. A head and shoulders pattern that takes months to develop will of course signal a reversal of a much larger trend than a head and shoulders that takes place intraday.

Chart Patterns I: Introduction to Reversal Patterns and Continuation Patterns

There are two major ways to trade the financial markets: swing trading and trend following. Swing traders use technical analysis to look for short-term price movement and capture gains in a relative short-term period. They look for the price patterns that hint for a reversal, in order that they can pick the tops and bottoms of the trend. Trend followers pay attention to the general direction of the price movement and enter trades by following the current direction. They would look for continuation patterns on the price charts to predict the future direction of the trend, or exit the trade until the reversal patterns appear.

The following articles discussed the rules for identifying reversal patterns and continuation patterns, and introduced some well-known reversal and continuation patterns. The reversal patterns include: Head and Shoulders, Double Tops and Bottoms, Triple Tops and Bottoms and Saucers. The continuation patterns include Triangles (Ascending, Descending, Symmetrical and Broadening), Flags and Pennants, Wedges and Rectangles.

The patterns exhibit the psychology and momentum of the market. No matter which type of traders you are, it is always helpful to be aware of the patterns. Using the patterns is not a stand-alone method of trading the market, in fact, it is better to be used with a mix of trend lines and technical indicators. Beginners might first find it difficult to identify the patterns; they can familiarise the patterns by looking at the historical charts and try to identify the patterns.

Candlestick VII: Candlestick Patterns Confirming Reversals

Candlestick patterns are used to confirm reversals. Often when a price moves towards a support or resistance level, it is unclear for several periods on the chart whether it is going to break through or reverse. Intraday penetrations of important technical levels are often misleading signals, but quick bounces off support can be false signals as well. Candlestick patterns offer a means of confirming that a price has reversed itself at a key technical level. They also provide a precise entry point and ensure that the market's momentum is in the direction of the trader's position at the time of entry.

In the chart below, the Euro has made its famous double top against the US dollar. The first relative high has been established, and although there are later several intraday breaks above this level, no daily candle has closed at a new high. Shortly after, a rapid fall from the 1.29 level creates a bearish engulfing pattern that allows the trader to sell the next day with the market's momentum to the downside. The stop is placed just above the black resistance level, because a further test of the recent highs could easily lead to a breakout higher.

 

Candlestick VI: Using Candlestick Patterns in Trending Markets

Using candlestick patterns to trade trending markets can be an extremely useful tool to profit from exchange rate movement. The process is simple:

Identify the overall trend

Look for a retracement

Look for a candlestick pattern to confirm a reversal at the retracement level

 

The candlestick pattern serves to confirm the fact that the market is acknowledging the importance of the retracement level. Traders should look to enter the position just outside of the reversal candle's range. At that point, there is sufficient reason to believe that the retracement is over and that the primary trend is ready to resume.

Candlestick V: Using Candlestick Patterns in a Range bound Market

In a range bound market - meaning a market that does not possess a clear directional trend, but rather moves back and forth between support and resistance - traders are essentially looking to short at the top of the range, and buy at the bottom of the range. It is worth noting that this strategy often results in limited profits, as it does not seem to rely on identifying a trend. Nevertheless it can be useful in capturing many small moves for the trader who can maintain discipline and self-control while trading this strategy.

Traders should start by identifying a range bound market.

Once the market is identified to be range bound, traders should look for oscillators suggesting overbought/oversold levels at support and/or resistance.

Traders should then look for a candlestick pattern that also suggests a reversal at the top/bottom of the market's range. When this has been identified, traders can enter once the reversal is confirmed. 

Candlestick IV: Thrust Day and Run Day

A thrust day 

 An up-thrust day is when the close for the current period surpasses the previous period's close. A down-thrust day is when the close for the current period is below the previous period's close.

Similar to spike and reversal days, thrust days signify both the strength in the market as well as the possibility of directional reversals. A series of up-thrust days would suggest a pronounced up trend, while a series of down-thrust days would indicate a downtrend dictated by seller dominance in the market.

A run day

 An up run day occurs when the true high of the run day surpasses the true high for the past N days, and when the true low is less than the minimum true low on the following N days. A down run day is simply the mirror image of an up run day

Run days can be thought of as a trend-following indicator in the sense that they can only be identified N days after the trend has past. As a result, they may not be ideal for forecasting direction, but can be used as confirmation that a clear trend has in fact manifested itself.

Candlestick III: Reversal Days

A reversal high day is a day in which the high price reaches a level higher than the previous high, and then reverses to close below the previous close. Like spike days, a reversal high day's mirror image is a reversal low day, in which the market sets a new low before reversing to close above the previous close. Also like spike days, the significance of reversal days increases when there is a preceding up trend (for reversal high days) or a preceding downtrend (for reversal low days).

While reversal days are widely watched and hence warrant attention from all traders, they are still prone to yielding many false trade signals. As a result, many traders who rely heavily on candlestick patterns prefer to see a reversal high day reverse to close below not just the preceding day's close, but also the preceding day's low. This signifies a strong reversal in the market, suggesting that sellers have taken control and that now may be a time to enter a short position.

The chart below illustrates how reversal day can be identified and what they can signal for traders who choose to incorporate them into their trading arsenal.

Candlestick II: Spikes Days

Apart from the popular patterns described in the previous articles, there are other patterns that are indicative of the market's psychology that are worth to take a look.

A spike high is a period whose high is sharply above both the high of the previous period as well as the high of the following period. Conversely, a spike low is a day whose low price is sharply below both the low of the following period as well as the low of the previous period. Spikes can often signal reversals of the most recent trends and they can often look similar to hammers and hanging man.

The greater the spike is - meaning the larger the difference between the high/low on the spike and the high/low on the periods before and after the spike - the greater its significance. Also, a spike high's significance also increases when the market is trending upwards, while a spike low's significance increases when the market is trending downwards.

The charts below illustrate how spike highs and lows can be identified, and what they can signal for traders who choose to incorporate them into their trading arsenal.

Candlestick I: Introduction to Candlestick and its patterns

What is a candlestick chart?

Candlestick charts shows information about the price action and the movement of the currency price over a specified period of time. It contains the market's open, closing, low and high of that specific time frame.

Below is an analysis of a candlestick chart and its components.

 

 

On a daily chart, each candle represents a 24 hours period. It contains information of the daily open and daily closing price, the highest and lowest price during that day. On an hourly chart, each candle represents an hour and so on. Since the forex market is a 24 hours market, there is no real daily open or closing price. The chart provider will decide a time, 5pm EST for instance, as the daily open and closing time. Different chart providers may have different choices for the open and closing time. Traders may find the charts from different providers are slightly different to each other.

What are candlestick patterns?

Technical analysts found that, by observing the candlesticks, there are recurring patterns on the candlestick charts. Such patterns are like recurring pictures on the candlestick charts and they tend to occur when a trend is about to end or reverse its direction. The patterns are very good visual representation of the price movements and give traders a good grasp of what is going on in the market.

Why are candlestick patterns so important?

Why are candlesticks so important? It is because they are the best gauge of what is going on in the market at the present time. If a candlestick is very short, it implies that the range for the trading day was very tight. If this candle appears after a strong up-trend, it may suggest that sellers have now begun to enter the market more aggressively, and thus the price may be on its way back down.

Eventually, candlesticks patterns can easily be used to identify potential reversals of trends in the market - especially when used in conjunction with other indicators. By observing the candlestick patterns, traders can speculate potential reversals of trends and entering the market with strong reference to the patterns.

The following are key patterns to watch out for:

Piercing Line

Bullish reversal patterns which shows sellers are losing their dominance.

Dark Cloud Cover

Bearish pattern showing slower buying momentum.

Shooting Star

Reversal patterns that occurs after gaps. Buyers make new high but are fail to sustain then.

Harami

Harami shows a trend that is losing its momentum and may reverse. Bullish or bearish depends on the existing trend.

Evening Star

Reversal pattern shows trend has changed direction after making new highs.

Morning Star

Similar to evening star, reversal pattern shows trend has changed direction after making new lows.

Hammer/Hanging Man

Good reversal pattern after a severe trend. Signifies weakening market sentiment. Pattern is considered a hammer after a down trend and a hanging man after an up trend.

Bullish Engulfing

Usually occurs after dramatic down trends. Good indication that downside momentum is lost as a large candle is completely reversed at next time frame.

Bearish Engulfing

Common pattern after strong up trends. Signifies that buyers are losing control.

Doji/ Double Doji

Pattern implies indecision in the marketplace as the price has a big range but does not going anywhere.

Technical Analysis VIII: Price Channels

A trending market can move between parallel support and resistance levels. A price channel between two parallel lines can often be drawn in a trending market. The key to a price channel is that the lines be parallel to each other. The value of the price channel in predicting the ongoing speed of a trend depends on the lines being parallel.

 Unlike trend lines, which can be drawn on any chart with two relative lows or highs, price channels should not be forced on a chart where they are not quickly apparent. Once a trend line is established, create a duplicate parallel line on the chart. Then move it up to the relative highs above or down to the relative lows below the trend line. If two or more fit with the line, there may be a valid price channel. Otherwise, the market may simply be too volatile - even in the midst of a strong trend - to plot a channel.

 

 In the above example the (support) trend line itself is valid, but creating a parallel line on the opposite side of the prices does not add any value to the chart and is not warranted by the data. Placing a support or resistance line where it does not belong will simply provide you with false signals to buy or sell.